|
Click the link above to return to the products page
|
|
|
|
a |
HIGH ANALYSIS COMPLEXED AND CHELATED LIQUID FORMULATIONS WITH EXCEPTIONAL COMPATIBILITY CHARACTERISTICS
The NutriChel range of liquid foliar applied, complexed and chelated secondary nutrient and micro-nutrient products is formulated with wetting agents and surfactants and possesses an exceptional degree of compatibility with other agrochemicals. Products include single and multi-nutrient combinations to prevent and cure specific deficiencies and mixes for particular crop requirements.
SINGLE AND MULTI-NUTRIENTS COMPLEXED WITH LIGNOSULPHONATES
For the treatment of specific nutrient deficiencies
Product
|
|
Analysis (w/v)
|
|
Pack Size
|
|
Rate (l/ha)
|
Manganese
|
|
Mn 6.3%
|
|
10L
|
|
2.5 – 5.0
|
Magnesium
|
|
Mg 5%
|
|
10L
|
|
2.5 – 5.0
|
Iron
|
|
Fe 6%
|
|
10L
|
|
1.25 – 2.5
|
Calcium
|
|
Ca 6%
|
|
10L
|
|
2.5 – 5.0
|
Copper
|
|
Cu 6.3%
|
|
10L
|
|
1.25 – 5.0
|
Zinc
|
|
Zn 9%
|
|
10L
|
|
1.25 – 5.0
|
Manganese/Copper
|
|
Mn 5.25%, Cu 1%
|
|
10L
|
|
2.5 – 5.0
|
All the above nutrients may be tank mixed with one another, however, multi-nutrient combinations for deficiencies commonly occurring on particular crops are given overleaf.
Deficiencies occur when the rate of growth is faster than the rate at which soil reserves become can be taken up by the roots. Early spring when crops are responding to nitrogen but soils are still fairly cold or when soils are water-logged or suffering from drought are examples. More than one nutrient may be deficient or the application of one nutrient may increase growth rate and cause a nutrient which is borderline to become deficient. NutriChel Crop Mixes are designed to be applied during these periods to overcome the problem.
MULTI-NUTRIENT CROP MIXES
For the treatment of multiple deficiencies on particular crops.
Product
|
|
Analysis (w/w)
|
|
Pack Size
|
|
Rate (l/ha)
|
Turf
|
|
N 3.7%, Fe 6.2%
|
|
10L
|
|
10 – 20
|
Beets & Brassicas
|
|
N 3.7%, MgO 2% (Mg 1.2%), SO312.5%(S 5%), Mn 5%, B 0.9%, Mo 0.12%
|
|
10L
|
|
2.5 – 5.0
|
Linseed
|
|
N 3.7%, MgO 2% (Mg 1.2%), SO3 12.5%(S 5%), Mn 3.7%, Fe 1.2%, Cu 0.3%, Zn 0.3%, B 0.13%, Mo 0.01%
|
|
10L
|
|
2.5 – 5.0
|
Vegetables
|
|
MgO2.5% (Mg 1.5%), SO3 12.5%(S 5%), Mn 1.2%, B 0.6%, Cu 1.2%, Zn 0.6%, Mo 0.1%
|
|
10L
|
|
2.5 – 5.0
|
Cereals
|
|
SO3 6.1% (S 2.4%), Mn 3.7%, Cu 1.8%, Zn 0.6%
|
|
10L
|
|
2.5 – 5.0
|
Potatoes
|
|
MgO 4.2% (Mg 2.5%),SO3 13.6% (S 5.5%),
Mn 3.7%
|
|
10L
|
|
2.5 – 5.0
|
SINGLE AND MULTI-NUTRIENTS CHELATED WITH EDTA
For the treatment of deficiencies where only EDTA products are compatible.
Product
|
|
Analysis (w/w)
|
|
Pack Size
|
|
Rate (l/ha)
|
Mn EDTA
|
|
Mn 8%
|
|
10L
|
|
1.5 – 3.0
|
Cu EDTA
|
|
Cu 6.3%
|
|
10L
|
|
0.4 – 0.75
|
Mn/Cu EDTA
|
|
Mn 6.9%, Cu 1.3%
|
|
10L
|
|
2.0 – 3.5
|
SINGLE AND MULTI-NUTRIENTS COMPLEXED WITH MONOETHANOLAMINE
For the treatment of calcium/boron deficiencies or boron deficiency alone.
Product
|
|
Analysis (w/w)
|
|
Pack Size
|
|
Rate (l/ha)
|
Calcium/Boron
|
|
CaO 11% (Ca 8%), B 2.7%
|
|
10L
|
|
2.5 – 5.0
|
Boron
|
|
B 15.0%
|
|
10L
|
|
2.5 – 5.0
|
Where severe deficiencies occur, more than 1 application may be required.
Products should be applied in min. 200 l/ha of water. If the rate of a combination of products is increased, water rates should be increased accordingly.
For full details of application rates, refer to the Nutrichel Product label.
NUTRICHEL LIQUIDS – HIGH COMPATIBILITY – LOW PHYTOTOXICITY
Click the links below to view the other products in the Liquid Fertiliser range
|
 |
|
High quality inorganic liquid macro secondary and micro-nutrinets at highly competitive prices.
|
 |
|
Stabilized liquid nitrogen with calcium, magnesium or sulphur to prolong uptake and promote N efficiency.
|
 |
|
To enhance the natural ability of plants to maintain healthy growth.
|
|
|
